Our prints are made on industrial printers typically used for architectural and engineering work. That’s why we call them Engineer Prints! Your photo will be printed in halftone black and white ink or lo-fi color on extra-light 20lb bond paper.

https://www.parabo.press/engineer-prints 

Specifications

  • 36x48 inches, portrait or landscape image
  • Half an inch border on all sides (image itself is 35x47 inches)
  • Extra-light 20 lb. paper
  • Templates available:
    • Rectangle
    • Floating circle
    • Triple stack (20"x 13" rectangles)
    • Grid of 9 (10" squares)
    • Grid of 30
    • Grid of 130
  • Proudly printed in Pennsylvania
  • Shipped rolled in a tube

Pricing

  • $30 per print

Pairs well with

  • Wood Poster Rails - save on rails when you bundle!
    • 36" Wood Poster Rails (portrait orientation)

    • 48" Wood Poster Rails (landscape orientation)

File recommendations

  • File size: 5-10 MB
  • Resolution: 300 PPI

Hanging your print

Engineer Prints are shipped rolled in a tube. To remove curled edges: carefully roll the print the opposite way that it was packaged. You can also try leaving it flat overnight with books on the corners as well. Gravity will flatten the rest once it’s hung up.

Here's how to hang your print with your wood rails in a few simple steps. All you need is a nail or Command Hook to hang the finished product on the wall by its string.

First, lay your print on the floor or flat surface. There are two parts to the rails you received: the top and bottom. Each has two slats that are held together with magnets. Detach the top and bottom pieces, leaving you with 4 separate slats. Make sure to keep the pairs separated.

Lay down the top portion of the rails (with the string) with the magnets facing up. Next, place the top of the print onto the rail piece, lining up the top of the print with the top of the slat. Then, sandwich the print by placing the pairing wood slat on top. Be sure to line up the magnets, and they'll snap together to hold the print.

Repeat these steps to attach the bottom rails to the bottom of the print, and it's ready to hang!